1. Cutting is to cut the shape and size of the whole material required for crystal embryo pressing with large saw blade at high speed.
2. Pressing with the required size and shape of mold to produce finished product, raw material and the high temperature to 900 ℃ above melting, into the mold, die casting
3. After pressing, put the product into a furnace with a temperature of 600 °C, and slowly cool down after 3 days, so that the product is harder and the density distribution is more uniform. We have 2 sets of large cooling machines with a length of 100 meters each to ensure the quality and efficiency of our products.
4. Polishing: the rough embryos pressed out of the mold are directly grinded into the cutting lines of the finished products with diamond discs. After rough polishing, the finished products are polished with polishing powder until they are crystal clear
5. Laser laser produces pictures through 3D or planar plate making, and USES laser focus to gasify the glass, so that the inside of the glass presents the specified pattern.
6. Drilling is the process of drilling with a drill bit according to the size and location of the required drilling before the completion of the finished crystal.
7. Silk screen crystal surface with different color materials for effect treatment, the color layer is thicker, focus on the rear can fall off.
8. The use of similar electroplating techniques in the crystal surface with different colors, thin layer, friction can scratch, scratches, because the color is often at the bottom of the color plating, so often use other objects attached at the bottom of the color plating, or the use of silver plating technology.
9. Strong three-dimensional carving, high technology, fine workmanship, high cost.Divided into manual engraving graphics, machine engraving text.
10. Sandblasting has a weak stereoscopic sense, a relatively flat sense, and a strong sense of plane vision
The packaging scrubbed the crystal ashtray clean and put it into a special box. This is a finished product.
